XTOOL InPlus IP508 OBD2 5 System Diagnostic Tools Car ABS SRS AT Engine Scanner with EPB Oil 6 Reset Auto VIN Online Free Update

• weight: 485 g

-- Enhanced ABS/SRS/Transmission/Engine Systems Diagnostic:

1. Engine System Diagnosis
By Reading, Clearing DTCs and viewing Live Data Stream, the scan tool can help you easily find out the cause of the Engine System problem and turn off the warning light related, thus ensuring the engine works properly, and enhancing its performance.

2. ABS System Diagnosis
By accessing to ABS system to view its Live Data Stream, and retrieving the fault codes, this IP508 diagnostics scanner can troubleshoot the ABS issue with a visual inspection of all brake components that caused the warning light, and turn the light off.

3. SRS System Diagnosis
By detecting every electronic parameters in SRS system to check their health status, this diagnostic tool can address the SRS potential issues timely to ensure your driving safety, and turn off the warning light of Airbag.

4. Transmission system diagnosis
By checking the Transmission system, this tool can figure the problem out via reading codes, or check the health status via Live Data viewing, and turn off the warning light, making sure that the right amount of power goes to the wheels to drive at a given speed.

--Much More Than A Car Code Reader—Save You A Big Budget !

6 Most Commonly Useful Maintenence Services makes IP508 Diagnostic scanner a great winner!

● ABS Bleeding:
Cycle the ABS pump to bleed the air out of the ABS to restore the braking sensitivity.

● Oil Reset:
Reset the service and zero oil light once changed the oil.

●Throttle Relearn:
After clearing or repairing the electronic throttle, re-learning and adapt throttle sensor position.

●EPB Reset:
Reset the calipers, brake discs or pads after the electronic parking brake system is repaired or replaced.

●BMS Reset:
Reset the monitoring unit of the car battery after replacement.

●SAS Calibration:
Erase the fault steering angle sensor memories and make calibration for the Steering Angle Sensor.

NOTE: All the Service functions available vary across vehicles. We recommend come to us with car VIN# to check compatibility before purchase!

--Powerful 8-IN-1 Live Data Graphing & Date Record & Playback
This allows users to view detailed PID on sensors. You can select and combine up to 8 PID graphs in one view for better comparison and analysis. Live data records can be exported and stored as CSV files. All diagnostic data can be recorded and generated into reports which can be shared via email！

✔ Customize Specific PID on 4 Main Systems
✔ 8-IN-1 Live Data Graphing
✔ Live Data Record/Playback
✔ Export Live Data as CSV File

--All 10 Modes OBD II Diagnosis for Car Engine System

Supports all 10 modes of OBDII standard to ensure complete system diagnosis and pass a smog check, including read/clear codes, view live data, freeze frame data, vehicle info, check I/M readiness status, O2 monitor test, on-board monitor test (Mode $06), O2 Sensor Test, component Test. A great money saver to make a full check on the engine emission system

1.Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs)

2.Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes and resets monitors.

3.Data Stream: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.

4.I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.

5.Read Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display.

6.View Freeze Frame Data: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.

7.O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.

8.On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems.

9.Read Vehicle Information:Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.

10.Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability.

--Extra Features On InPlus IP508 OBD Scanner You Should Know About

✔ One Click WiFi Update Makes Everything Easy
Unlike other scanners in the market,, you can get the auto-update via wifi to get the latest software. Any questions feel free to reach us via XTOOL Tech Support(Pre-sale & After-sale) :support2@xtooltech.com
✔ AutoScan & AutoVIN
AutoVIN functions allowing you to quickly figure out Vehicle Identification No. (VIN) to perform fast diagnostic.
✔ Diagnostic Report Printing & Sharing
IP508 auto diagnostic scan tool enables diagnostic tech or mechanics to generate diagnostic reports before and after car diagnostics and maintenance services by printing it out or sending it to customers via PDF.
✔ DTC Lookup Library
IP508 code reader can lookup the complaint fault code's definition directly, including the fault description, the cause of the fault, maintenance suggestions and background knowledge, saves your searching time and help you better understand the fault code definition.

--Multi Languages Support

XTOOL IP508 Supports 14+ languages. Please send the Serial Number(S/N) to change English to Spanish, Portuguese, French, Japanese, German, Polish, Russian, Italian, Korean, Dutch, Swedish, etc.

--Wide Vehicle Coverages over 10,000+ cars

Cover 10,000+ Vehicles, Up to 2022, 2021 including cars, SUVs, minivans, 12v light-duty trucks