ESP32 S3 0.42 Inch OLED Development Board ESP-32 RISC-V WiFi Bluetooth For Arduin Micropython

• weight: 485 g

ESP32 S3 0.42 OLED

The ESP32-S3FH4R2 is a highly-integrated, low-power, 2.4 GHz Wi-Fi System-on-Chip (SoC) solution that now has WiFi and BLE support built-in native USB as well as some other interesting new technologies like Time of Flight distance measurements. With its state-of the-art power and RF performance, this SoC is an ideal choice for a wide variety of application scenarios relating to the Internet of Things (loT), wearable electronics, and smart homes.

With native USB and 4MB Flash this board will let you upgrade your existing ESP32 projects. Native USB means it can act like a keyboard or a disk drive, and no external USB-to Serial converter required WiFi and BLE mean it's awesome for loT projects.

ESP32-S3FH4R2 Dual Core 240MHz Tensilica processor-the next generation of EsP32-Sx, with native USB so it can act like a keyboard/mouse, MIDI device. disk drive etc.

A reset button (great for restarting your program or entering the bootloader), and a button on GP100 for entering the ROM bootloader or for user input.

This chipis a great step up from the earlier ESP32-S2! This ESP32-S3 chip we are using with 4MB flash and 2M PSRAM, but it does have 512KB of SRAM. Supports CircuitPython. Esp_IDF andArduino.

Features:

ESP32-S3FH4R2 Dual Core 240MHz Tensilica processor; Type-C USB;

4MB Flash2M PSRAM;

13xI0;

1x1.0-4P connector (GND, 3V3, SDA(GPI02), SCL(GPIO1))

1xRGB(GPI039);

1xLED (3.3V Power Supply);

1xReset button (great for restarting your program or entering the bootloader);

1xBoot button (GP100, entering the ROM bootloader or for user input);

Compatible with MicroPython, Arduinoand ESP-IDF;

3.3V Regulator with 500mA peak output;

Ceramic Antenna.

Size &Weight: 21.8*18.1mm Weight: 2.6g;

Documents: https://github.com/01Space/ESP32-S3-0.420LED