By BG817143172

tutto ok

2022-11-04 00:00:00

By dloreg

At the first view I was disappointet because the IO0 button for programming is missing. But when testing the ESP32-CAM with the Ardiono IDE the programm can be loaded without any problem in the configuration I received. The CAM is a cheap one and cannot be focused. But you can buy a more expensive one that can be focused and the pictures and videos will be of a much better quality. The delivery was very fast - as usual for BANGGOOD.. I can recommend the product.

2022-10-21 00:00:00

By firmagera

Még nem használtam, mert még minden feltétel adódott meg az elképzeléseimhez. Gyorsan hiánytalanul megérkezett.

2022-07-10 00:00:00

By BG337851814

Sehr schnell geliefert. Beide ESP32-CAM laufen bei mir mit der aufgespielten Software als AP. Die Module gehen beim einstecken in den Download-Modus, reset drücken, dann läufts. Das Arduino-Sketch Example/ESP32/Camera/CameraWebServer läuft mit folgenden Einstellungen: Board: ESP32 Wrover Module Partition Scheme: Huge APP (3MB....) im Sketch: #define CAMERA_MODEL_AI_THINKER, ssid und password eintragen, dann läuft die ESP32CAM im eigenen Netz. Getestet mit Arduino-IDE 1.8.19 und Espressif-esp32 2.0.3

2022-06-28 00:00:00

By riccardoucci18

very good, you can use the metal sd card slot as heatsink for the camera, the antenna is ok, but is a bit difficult to replace the 0 ohm resistor for the antenna switching

2022-05-26 00:00:00

By mankes

All is ok ! Fast shipping and delivery

2022-03-12 00:00:00

By BG491049507

perfect !!

2022-02-18 00:00:00

By DrMichael

Well packaged, received in good condition and excellent delivery time (12 calendar days from order). The ESP32CAM is one of my favorite micro-controllers. I find it useful to have a SD card reader built in, but it does mean there's a shortage of GPIO pins. The other main issue is that you normally need to program it with a FTDI chip. The MB option gets round this neatly - just plug the EDP32cam into the motherboard and you can program it over the USB port. Ransom nerd have a good description of this board and associated tutorials. I am happy to recommend this MCU.

2021-12-15 00:00:00

By Sandorka

The product works fine with the originally uploaded code, but when I upload my own code I got an error message 0x20002 which means that camera pin setting is wrong. I tried many setups without success. WHAT IS THE PINOUT for the pins used by the camerajQuery111303389024727909917_1639075977269?

2021-12-09 00:00:00

By JonathanTang

Received the order today and was disappointed where the ESP32-CAM-MB board was said to have IO0 button on the featured picture. The board received is without IO0 button, to me, this is misrepresentation of the merchandise. And as usual, no user's guide of any kind included.

2021-11-29 00:00:00

Company Information

Customer Service

Connect with us

FOLLOW US AND GET NEWEST INFORMATION