18W RGB LED Swimming Pool Light Underwater Waterproof Remote Control Wall Mounted Night Light

• weight: 485 g

Specification:
Power: 18W
LED Chips Type: SMD2835
Beam Angle: 120 deg
Power rating: AC12V
Frequency: 50~60Hz
Waterproof: IP68
Installation Location: 0.6M below water level
Cable Length: 135cm
Remote Control: Within the scope of 50m

Features:
252Pcs 2835 lamp beads LEDs with super bright and crisp colors.
Can be switched on and adjusted by a remote RGB controller for convenience.
Plastic housing makes it acid-proof and alkali-proof.
Supports 15 different kinds of color styles.
The lamp is filled with resin inside, which makes it 100% waterproof
Easy to install, fitting to standard pool fittings.
Compatible for both fresh or salt water pool

Remote Control Operation:
▶ ON/OFF: Power switch function,press the key for turning on or turning off the light.
▶ MODE: Modes selection,the light can be turned to the first program when press this key for 5 seconds at any working program.
▶ 15 pre-programmed color modes of RGB light.
1.R-G-B change gradually to full modes
2.RG:Static State Yellow
3:RB:Static State Purple
4.GB:Static Cyan-Blue
5.RGB-RG-G-GB-B-R animation 6.RB-GB-B animation
7.R-G animation
8.B-R animation
9.G-B animation
10.RB-B animation
11.G-GB animation
12.R:Static State Red
13.B:Static State Blue
14.G:Static State Green
15.RGB:Static State White
▶ B+/B-: Adjust the brightness of the light at any working program,there are total 10 adjusting levels.
▶ S+/S-: Adjust the color changing speed,there are total 10 adjusting levels

Note:
You will need a AC12V transformer to power the lights. If more than AC12V, it will damage the light.

Package Included:
1 x LED Light
1 x Remote Control (1x Battery 23A/12V Not Inculude )
1 x Waterproof Connector