12V 6A Pulse Repair Battery Charger LCD Display Accumulator Charging AGM/GEL Lead-acid Batteries Charging Touch Screen Control

• weight: 485 g

Description:

1. Charge 12V ( 2-100AH) lead-acid batteries. (Lithium battery charging is prohibited).

2. For old lead-acid batteries that have been idle for a long time and cannot be charged, you can choose the repair mode to try to activate and repair them.

3. Four modes, charging mode can be selected according to different types of batteries.

4. One-touch switch mode, high-definition LED screen displays charging voltage, current, and temperature.

5. Automatic detection of ambient temperature

The winter and summer mode will adjust the appropriate voltage according to the detection environment temperature,0-10℃,>28℃.

6. Reverse connection protection alarm

The product has a reverse connection protection alarm. When the positive and negative terminals of the alligator clip at the output end are reversed.The display screen and buzzer give out an alarm prompt.

7. Temperature protection

The product automatically detects when the charger temperature rises more than 40 degrees during charging, the charging current will automatically adjust to the appropriate current for charging. It will automatically turn off the output when the temperature rises to 60 degrees and show that the CUP stops powering.

8. Multiple protection

This product has short-circuit protection, over-current protection, over-voltage protection, low-voltage protection, over-temperature protection, fire protection, reverse connection protection, and multiple protections so that you can use it more at ease.

9. Prevent accidental touch

The touch button of this product is equipped with the function of preventing accidental touch. When charging in each mode, you need to long press to switch the mode.

Safety Precautions :

1. It is forbidden to charge lithium batteries! It is strictly forbidden to charge scrap batteries, non-lead-acid batteries or non-voltage batteries! It is forbidden to charge non-rechargeable batteries! Open flames are forbidden when charging! There is high voltage in the machine and it is strictly forbidden to disassemble it without permission!

2. When charging the vehicle or equipment, please remove the battery and place it in a safe surrounding area with no flammable and explosive materials for charging, otherwise an accident will occur and you are responsible for it!

3. Beware of rain when the product is used outdoors, and must maintain good ventilation when charging. It is strictly forbidden to charge in or on the car, beware of flames and sparks to avoid fire.

4. The charging time exceeds 12 hours, the power should be cut off, and long-term charging is strictly prohibited!

5. If the wire is damaged, in order to avoid danger, it must be replaced by the manufacturer or professional, and it cannot be disassembled privately!

6. When connecting or disconnecting the battery from the charger, disconnect the power supply first.

Specification:

Package Included: