iFlight SucceX-D F7 V2.1 Stack (F7+60A ESC) 2-6S for DJI Air Unit FPV Racing Drone

• weight: 485 g

Description:

The SucceX-D F7 is designed to work seamlessly with DJI’s new HD FPV system. To make things even simpler, the DJI Air unit can just be plugged into the FC with the included wire harness. In addition, we added the popular and reliable USB Type-C instead of Micro USB and therefore the same standard than your DJI module.

Features:

• Universal USB Type C connector instead of micro USB

• Plug-and-Play. No need to solder tiny wires.)

• Supports BLHeli pass-through for easy ESC upgrade and configuration.

• Designed to support DJI Digital FPV.

FC // SucceX-D F7 TwinG

MCU: 216MHz STM32F722

Gyro：2x ICM20689

Baro: YES

Blackbox：32MB

Betaflight OSD: YES

BEC: 5V 2.5A / 9V 2.5A

Current sensor scale: 100

Inverter for SBUS input (UART2-RX)

Smartaudio & Tramp VTX protocol supported

Beeper pad : Yes

RSSI input pad: No

UARTs：5

Motor outputs: 8

8 pin 4in1 ESC port (GND, VBAT, M1, M2, M3, M4, CUR, R5)

6 pin DJI Air Unit port (R1, GND, R2, T2, GND, 9V)

BLHeli32 Telemetry：RX5

Input voltage：recommended 2-6S, MAX 8S

Firmware Target: IFLIGHT_F722_TWING

Mounting pattern: 30.5*30.5mm φ4mm with Grommets φ3mm

Dimensions: 36*36mm

Weight: 7.5g

USB type-C

ESC // SucceX 60A V2 4in1

Top Features:

- 8 layers single-board stacking PCB board

- 4oz 1.6mm thick

- 32bit STM32FO51K MCU, 48kHz maximum clock speed

- TDK MLCC Low ESR ceramic capacitors

- Top grade metal MOSFET

Specification:

MCU: STM32F051

Up tp 48kHz PWM frequency

Capacitance: 470uF/50V

Current Sensor: Yes

Input: 2-6S LIPO

Constant: 60A / Burst: 80A

BlHeli32 telemetry: Yes

BEC: No

Supports up to Dshot1200, Proshot, Oneshot, Multishot

Target: iFlight-BL32-4IN1

Weight:14.4g

Mounting pattern: 30.5*30.5mm/Φ3mm

Dimensions: 43*39mm (including the power pads)

Package included:

1* iFlight SucceX-D F7 V2.1 Stack (F7+60A ESC)