/English
HENGE UBEC 6V 6A 2-6S Lipo NiMh Battery Switch Mode BEC for RC Airplane
SKU475577
10 Reviews
USD
17.99
Wholesale Prices :
| Qty: | 4-7 | >=8 |
| Price: | $5.32 | $5.02 |
Qty:
In stock
30-day Return Policy,
Learn More
Description
- weight: 485 g
Switch Mode UBEC HENGE 5v/6v 4A/6A, 2-6S LIPO/ 6-16 cell Ni-Mh. Adopt the most advanced synchronous rectification switching power supply control chip design, with over-current and thermal protection, the chip at maximum efficiency as high as 93%.
Description:
Brand Name: HENGE
Item Name: 4A-UBEC
Output Voltage:5V/4A or 6V/4A(Selectable by using a jumper connector)
Input Voltage:7V-25.5V (2-6S Lipo or 5-18 cells NiMH /NiCd)
Continuous output current: 4A
Peak output current:6A(Less than 15 second)
Ripple:less than 45mVp‐p(@2A/12V)
Size: 35mmx20mmx5.8mm(L*WX*G)
Weight: 14g
Features:
Uses an advanced switch mode DC-DC regulator IC.Having protective function of overcurrent or overheat.Highest efficiency of IC is 93%
4A Output Voltage and 6A peak output current can provide sufficient current for RC model.
Output cable was added Magnetic filter to reduce electromagnetic interference.
The working status is shown by an LED, it lights when the UBEC works normally.
Enough voltage operating range(7V-25.5V)
It is very suitable for RC airplane and other RC models especially when the built-in BEC in the speed controller has a very limited output capability.
Note:
Even though 4A-UBEC was added Magnetic filter to reduce electromagnetic interference. electromagnetic interference is inevitable for switching type UBEC in sometimes.
In order to receiver operating ,Please do not put Output filter magnet and MPU together.
Package Included:
1 x HENGE UBEC
,
,
,
,
,
,
,
null
More Details
customers reviews ( 10 )
5
/ 5.0
5 stars
100%
4 stars
0%
3 stars
0%
2 stars
0%
1 stars
0%
By alasdairMcC454
Nice clean output, measured about 2mV of ripple at 2A load, same at 1A. With 2A continuous it barely gets warm.
One of the best BEC's I've tested for output regulation, low noise and continuous current delivery.
2020-09-07 00:00:00
By BG221016382
veio muito rápido
2019-07-05 00:00:00
By BUZER_2005
All as described. Recommended
2019-06-23 00:00:00
By olimedia
très bien
2018-10-25 00:00:00
By Frode
Using an external uBEC is necessary if the power consumption exceeds Your BEC abilities. This one is a switching type, hence more efficient than what is in Your regular BEC.
I cannot check the 4A continuous/6A burst power of this, but if it does what it says on the tin, it should be good for powering 6 servos.
2018-08-27 00:00:00
By satmar
Ottimo ubec,ideale per piattaforme FPV long range con molte apparecchiature a bordo.E' una sicurezza.....ottimo prezzo e alta qualita'....come sempre Banggood ci accontenta ......
2018-08-17 00:00:00
By hardrain
This UBEC looks good and is small and light. I bench-tested it and it works as expected: at 4Amps output decreases to 4.86V (-2,8%). At 5 Amps Vout goes down to 4,8 (-4%) but it is still stable. Above 5 voltage drops fast. Overload protection works well.
Under charge the heat is reasonable, but I recommend to place it in a ventilated place. At the end. I think it can be placed in models with 4+ servos and give a good service.
2018-04-26 00:00:00
By nkmabg
So far I am using it for bench tests, but it might end up in a 450 or 500 size helicopter. The littlle I have tested so far it works just fine. If anyone wants to know more about it's data, it is based on the IC APW7080. Data for the chip is easy to find on the net. It is compact and low weight. It is easy to change output voltage between 5 and 6 volt. It is also nice that it works over the wide input range from 2S (some 8 volts or less) to 6S (some 25 volts).
2017-12-05 00:00:00
By cpasmoi
Ubec qui va me service pour faire une double alimentation.
Merci Banggood
2017-07-22 00:00:00
By Arnror
Steady 5,08v from 2c,3c,4c with a variable load.
Didn't test the 6v function as I would have to break the shrink tube, but there's no reason to doubt that it's accurate.
Weighs 15g.
2017-02-18 00:00:00
