/English
Hantek DSO2D15 Dual-Channel + AFG Digital Storage Oscilloscope 150MHz 1GSa/s Signal Generator Oscilloscope 2 In 1
SKUJ92551
0 Reviews
0.00
Wholesale Prices :
| Qty: | 4-7 | >=8 |
| Price: | 0.00 | 0.00 |
Qty:
In stock
30-day Return Policy,
Learn More
Description
- weight: 485 g
Feature:
1) 2 channels, both are respectively controlled by independent knobes;
2) 150MHZ analog channel bandwidth;
3) 1 GSa/s real-time sample rate;
4) 8M memory depth;
5) Vertical range 2mV/div ~ 10V/div;
6) Built-in 1 CH 5MHz waveform generator;
7) Vertical resolution : 8bit;
8) Trigger: Edge, Pulse width, Video, Slope, Overtime, Window, Pattern, Interval, Delay, UART, LIN, CAN, SPI, IIC;
9) CAN decode and protocol analysis: RS232/UART、I2C、SPI、CAN、LIN
10) Can save as multiple data formats, such as setting, waveform, referance waveform, CSV, picture;
11) 5 bits digital voltage meter and 6 bits hardware frequency indicator function;
12) 32 kinds of auto measurements with statistics, real-time statistics of maxmum, minimum, standrad deviation and etc.;
13) 2 sets of digital voltmeter;
14) Support threshold testing, free measurements within the screen;
15) Abundant SCPI remote command control;
16) Many external interface: USB Host/Device.
Product Model(NOTE:Click on the model to reach the purchase link of the corresponding model)：
| Model | Channels | Bandwidth | Sampling Rate | Storage Depth | Signal Source (AWG) |
| 2CH | 100MHz | 1GSa/S | 8M | / | |
| 2CH | 150MHz | 1GSa/S | 8M | / | |
| 2CH+1CH | 100MHz | 1GSa/S | 8M | 1CH | |
| 2CH+1CH | 150MHz | 1GSa/S | 8M | 1CH |
Specifications:
Model: DSO2D15
Channel: 2 CH+1CH
Bandwidth: 150MHz
Sample rate: 1GSa/S
Memory depth: 8M
AFG: 1CH
Parameters
| Model | DSO2D15 | DSO2D10 | DSO2C15 | DSO2C10 | |||
| Bandwidth | 150MHz | 100MHz | 150MHz | 100MHz | |||
| Oscilloscope channels | 2CH | 2CH | 2CH | 2CH | |||
| Waveform generator | 1CH | 1CH | - | - | |||
| Oscilloscope | |||||||
| Sample rate | 1GSa/s (single channel) 500MSa/s (two channels) | ||||||
| Acquisition | |||||||
| Sampling | Sample data | ||||||
| Peak-to-peak value | Display high frequency and random burr | ||||||
| Average | Average waveform, times: 4, 8, 16, 32, 64, 128 | ||||||
| High resolution | Up to 12bit | ||||||
| Input | |||||||
| Input coupling | DC, AC, GND | ||||||
| Input impedance | 1MΩ±2% ‖20pF±3pF | ||||||
| Probe attenuation factor | 1X, 10X, 100X, 1000X | ||||||
| Voltage classes | 300V CAT II | ||||||
| Maximum input voltage | 300VRMS (10X) | ||||||
| Horizontal | |||||||
| Waveform interpolation | (sin x)/x | ||||||
| Maximum record length | Single channel maximum 8M | ||||||
| Two channels maximum 4M | |||||||
| Horizontal scale range | 2ns/div~100s/div 1, 2, 5 step by step | ||||||
| Time base mode | Y-T, X-Y, Roll | ||||||
| Zero offsets | ±0.5 div×minimum time base gear | ||||||
| Sample Rate and Delay Time Accuracy | ±25ppm | ||||||
| Clock drifting | ≤±5 ppm/year | ||||||
| Increment Time Measurement Accuracy | single, ''acquisition'' mode | ||||||
| (Full Bandwidth) | ±（1 sample interval+100ppm×reading+0.6ns） | ||||||
| ＞16 times averages | |||||||
| ±（1 sample interval+100ppm×reading+0.4ns） | |||||||
| Sample interval=sec/div÷200 | |||||||
| Sample Rate and Delay Time Accuracy | ±50ppm（at any interval greater than 1ms） | ||||||
| Vertical | |||||||
| Model | DSO2D15 | DSO2D10 | DSO2C15 | DSO2C10 | |||
| Bandwidth | 150MHz | 100MHz | 150MHz | 100MHz | |||
| Rising time in BNC position (typical) | 2.3ns | 3.5ns | 2.3ns | 3.5ns | |||
| Vertical resolution | 8 bits resolution, each channel samples simultaneously | ||||||
| Vertical sensitivity | 2mV/div to 10V/div | ||||||
| Offsets range | 2mV/div to 20mV/div, ±100mV; 50mV/div to 200mV/div, ±1V; | ||||||
| 500mV/div to 2V/div, ±10V; 5V/div to 10V/div, ±50V | |||||||
| Mathematical operation | +, -, ×, ÷, FFT | ||||||
| FFT | Window: Rectangular, Hanning, Hamming, Brackman, Bartlett, flat top window | ||||||
| Bandwidth Limit | 20MHz | ||||||
| Bass response（-3db） | In BNC position ≤ 10Hz | ||||||
| Vertical gain accuracy | In ''normal'' or ''average'' acquisition mode, the accuracy of 10V/div to 10mV/div is ±3%; | ||||||
| In ''normal'' or ''average'' acquisition mode, the accuracy of 5mV/div to 2mV/div is ±4% | |||||||
| DC offsets accuracy | ±0.1 div±2 mV±1% offsets value | ||||||
| Voltage measurement repeatability, average acquisition mode | Under the same setting and environment, ≥16 waveforms are sampled, △V of any two averages: ±（3%×value+ 0.05 div） | ||||||
| Note: Bandwidth reduced to 6MHz when using a 1X probe | |||||||
| Trigger | |||||||
| Trigger type | Edge, Pulse width, Video, Slope, Overtime, Window, Pattern, Interval, Delay, UART, LIN, CAN, SPI, IIC | ||||||
| Trigger level range | ±5 divisions from the center of the screen | ||||||
| Trigger mode | Auto, general, single | ||||||
| Level | CH1~CH2 | ±4 divisions from the center of the screen | |||||
| EXT | 0~3.3V | ||||||
| Holdoff range | 8ns~10s | ||||||
| Trigger level accuracy | CH1~CH2 | 0.2 div×volts/div within ±4 divisions from the center of the screen | |||||
| EXT | ±（Set value× 6%+40mV） | ||||||
| Edge trigger | Slope | Rising edge, falling edge, rising or falling edge | |||||
| Signal source | CH1, CH2, EXT | ||||||
| Pulse width trigger | Polarity | Positive polarity, negative polarity | |||||
| Condition(When) | <, >, !=, = | ||||||
| Signal source | CH1~CH2, | ||||||
| Pulse width range | 8ns ~ 10s | ||||||
| Accuracy | 8ns | ||||||
| Video trigger | Signal standard | NTSC, PAL | |||||
| Signal source | CH1~CH2 | ||||||
| Synchronization | Scanning line, line number, odd field, even field, all field | ||||||
| Slope trigger | Slope | rise, fall | |||||
| Condition(When) | <, >, !=, = | ||||||
| Signal source | CH1 ~ CH2 | ||||||
| Time range | 8ns ~ 10s | ||||||
| Accuracy | 8ns | ||||||
| Overtime trigger | Signal source | CH1~CH2， | |||||
| Polarity | Positive polarity, negative polarity | ||||||
| Time range | 8ns ~ 10s | ||||||
| Accuracy | 8ns | ||||||
| Window trigger | Signal source | CH1~CH2 | |||||
| Pattern trigger | Pattern | 0: low level; 1: high level; X: ignore | |||||
| Level（signal source） | CH1~CH2 | ||||||
| Interval trigger | Slope | rise, fall | |||||
| Condition(When) | <, >, !=, = | ||||||
| Signal source | CH1~CH2 | ||||||
| Time range | 8ns ~ 10s | ||||||
| Accuracy | 8ns | ||||||
| Delay trigger | Polarity | Positive polarity, negative polarity | |||||
| Condition(When) | <, >, !=, = | ||||||
| Signal source | CH1~CH2 | ||||||
| Time range | 8ns ~ 10s | ||||||
| Accuracy | 8ns | ||||||
| UART trigger | Condition(When) | start, stop, data, odd-even check, reception error | |||||
| Signal source(RX/TX) | CH1~CH2 | ||||||
| Data format | Hex (hexadecimal) | ||||||
| Data length | 1 byte | ||||||
| Data bit width | 5 bit, 6 bit, 7 bit, 8 bit | ||||||
| Odd-even check | none, odd, even | ||||||
| Free level | high, low | ||||||
| Baud rate (optional) | 110/300/600/1200/2400/4800/9600/14400/19200/38400/57600/115200/230400/380400/460400 bit/s | ||||||
| Baud rate(user-defined) | 300bit/s~334000bit/s | ||||||
| LIN trigger | Condition(When) | Interval field, synchronization field, ID field, synchronization error, identifier, ID and data | |||||
| Signal source | CH1~CH2 | ||||||
| Data format | Hex (hexadecimal) | ||||||
| Baud rate (optional) | 110/300/600/1200/2400/4800/9600/14400/19200/38400/57600/115200/230400/380400/460400 bit/s | ||||||
| Baud rate(user-defined) | 300bit/s~334000bit/s | ||||||
| CAN trigger | Condition(When) | Start bit, remote frame ID, data frame ID, frame ID, remote frame data, data frame data, wrong frame, all errors, answer error, overload frame | |||||
| Signal source | CH1~CH2 | ||||||
| Data format | Hex (hexadecimal) | ||||||
| Baud rate (optional) | 10000, 20000, 33300, 500000, 62500, 83300, 100000, 125000, 250000, 500000, 800000, 1000000 | ||||||
| Baud rate(user-defined) | 5kbit/s~1Mbit/s | ||||||
| SPI trigger | Signal source | CH1~CH2 | |||||
| Data format | Hex (hexadecimal) | ||||||
| Data bit width | 4, 8, 16, 24, 32 | ||||||
| IIC trigger | Signal source (SDA/SCL) | CH1~CH2 | |||||
| Data format | Hex (hexadecimal) | ||||||
| Data index | 0~7 | ||||||
| Opportunity(condition) | Start bit, stop bit, no response, address, data, restart | ||||||
| Measurement | |||||||
| Cursor | Voltage difference between cursors △V | ||||||
| Time difference between cursors △T | |||||||
| Reciprocal of △T, in Hertz (1/△T) | |||||||
| Auto measurement |
| ||||||
| DVM | Data source | CH1, CH2 | |||||
| Measurement type | DC effective value | ||||||
| AC effective value | |||||||
| DC | |||||||
| Frequency meter | hardware 6 bits frequency meter | ||||||
| Arbitrary waveform generator | |||||||
| Channel | 1 | ||||||
| Sample rate | 200MSa/s | ||||||
| Vertical resolution | 12 bits | ||||||
| Maximum frequency | 25 MHz | ||||||
| Standard waveforms | sin、square, pulse, triangular, sampling wave, index, noise | ||||||
| Arbitrary waveform | Arb1, Arb2, Arb3, Arb4 | ||||||
| Sin | Frequency range | 0.1Hz~25MHz | |||||
| Square/pulse | Frequency range | 0.1Hz~10MHz | |||||
| Triangular wave | Frequency range | 0.1Hz~1MHz | |||||
| Sampling wave | Frequency range | 0.1Hz~1MHz | |||||
| Index | Frequency range | 0.1Hz~5MHz | |||||
| Noise | |||||||
| Arb1 | Frequency range | 0.1 Hz to 10 MHz | |||||
| Arb2 | Frequency range | 0.1 Hz to 10 MHz | |||||
| Arb3 | Frequency range | 0.1 Hz to 10 MHz | |||||
| Arb4 | Frequency range | 0.1 Hz to 10 MHz | |||||
| Waveform length | 8KSa | ||||||
| Frequency | Accuracy | 100 ppm (<10 kHz) 50 ppm (>10 kHz) | |||||
| Resolution | 0.1 Hz or 4 bits，take the greater one | ||||||
| Amplitude | Output range | 10mV~7Vp-p (high impedance) | |||||
| 5mV~3.5Vp-p (50Ω) | |||||||
| DC offsets | Range | ±3.5 V, high impedance | |||||
| ±1.75 V, 50 Ω | |||||||
| Resolution | 100 μV or 3 bits, take the greater one | ||||||
| Accuracy | 2% (1 kHz) | ||||||
| Output impedance | 50 Ω | ||||||
| General specifications | |||||||
| Display | Display type | 7'' diagonal TFT liquid crystal | |||||
| Display resolution | 800 (horizontal)*480 (vertical) pixels | ||||||
| Display colour | 16 million colours (24 bits true colour) | ||||||
| Persistence time | minimum, 1 s, 5 s, 10 s, 30S, infinite | ||||||
| Display type | dot, vector | ||||||
| Display brightness | adjustable | ||||||
| Grid type | adjustable | ||||||
| Grid brightness | adjustable | ||||||
| Interface | Standard interface | USB Host，USB Device | |||||
| General specifications | Probe compensator output | ||||||
| Output voltage, typical | about 2Vpp input ≥1MΩ load | ||||||
| Frequency, typical | 1kHz | ||||||
| Power supply | 100-120VACRMS(±10%), 45Hzto 440Hz, CATⅡ | ||||||
| 120-240VACRMS(±10%), 45Hz to 66Hz, CATⅡ | |||||||
| Power consumption | <30W | ||||||
| Fuse | T, 3.15A, 250V, 5x20mm | ||||||
| Operating temperature | 0~50 °C (32~122 °F) | ||||||
| Storage temperature | -40~+71 °C (-40~159.8 °F) | ||||||
| Humidity | ≤+104℉(≤+40°C): ≤90% relative humidity | ||||||
| 106℉~122℉ (+41°C ~50°C): ≤60% relative humidity | |||||||
| Altitude | Operating and nonoperating | 3, 000m (10, 000 feet) | |||||
| Mechanical shock | Random vibration | 0.31 g RMS from 50Hz to 500Hz, | |||||
| 10 minutes on each axis | |||||||
| Nonoperating | 2.46g RMS from 5Hz to 500Hz, | ||||||
| 10 minutes on each axis | |||||||
| Operating | 50g, 11ms, half-sine wave | ||||||
| Mechanical | Size | 318 x 140 x 150mm (length x width x height) | |||||
| Weight | 2900g | ||||||
Package Includes:
Details pictures:
More Details
customers reviews ( 0 )
0
/ 5.0
5 stars
0%
4 stars
0%
3 stars
0%
2 stars
0%
1 stars
0%
