/English
Geekcreit® DIY Mini Tesla Coil Module Unassembled 15W DC 15-24V 2A Plasma Speaker Electronic Kit
SKU987884
10 Reviews
USD
6.99
Wholesale Prices :
| Qty: | 4-7 | >=8 |
| Price: | $2.69 | $2.54 |
Qty:
In stock
30-day Return Policy,
Learn More
Description
- weight: 485 g
Note: This is a DIY kit, you need to assemble it.
Feature:
The Tesla coil can produce high temperature and high-pressure plasma, which can sing, ignition, wireless transmission, and light fluorescent lamp. It has a wonderful arc. It is a very interesting small production of scientific experiments. This is a DIY Tesla coil Kit parts, which needs to be soldered and assembled by yourself.
Parameters:
1. PCB size: 4.0mm*8.0mm
2. Power: 15W
3. Power input: DC 15-24V. The current is 2A. DC5.5 interface / pin
4. Audio input: 3.5 socket, can be connected to mobile phone, MP3, computer audio
Principle introduction:
Tesla coil is a transformer that operates on resonance principle. It was invented by Nicola Tesla, a Serbia American scientist in 1891. It is mainly used to produce ultra high voltage, but low current, high-frequency AC power. The Tesla coil is composed of two groups of resonant circuits (sometimes three groups) coupled. The Tesla coil is difficult to define, and Nicola Tesla has tried a large number of configurations of various coils. Tesla uses these coils to carry out innovative experiments, such as electrical lighting, fluorescence spectrum, X ray, high frequency alternating current phenomenon, electrotherapy, and radio energy transmission, transmitting and receiving radio signals.
Tesla function:
1. Electric arc function: the traverse of the rear end will produce an arc. The arc can also ignite.
2. Septum light function: after the Tesla coil is electric, the fluorescent lamp can be lighted apart.
3. Music playback function: a new concept loudspeaker for an electric arc to stimulate air to make air vibration produced by plasma. You can play mobile/computer music, but the sound is small.
Installation steps:
Tips:
1. Install small components at first;
2. Install complex components preferentially;
3. Pay attention to the installation direction of components.
4. Make sure the soldering iron does not touch the components for a long time. Otherwise it is easy to damage the components.
Note:
1. This product is safe, power is not high, will not be injured by electric shock, but it is not recommended to touch the top of the coil arc, there will be a sense of burning.
2. Do not touch the heat sink after a long time power supply, the temperature is very high, especially the use of 24v high voltage heat huge, if necessary, add their own cooling fan cooling, or working hours lead to too hot, please turn off for a period of time Electric use.
3. Tesla coil is recommended to work when the body or other objects close to the coil, the coil next to half a meter blank can not be other objects, as other objects as a good conductor will make the coil form a good loop, absorbing the coil energy, making Testers Pull the coil at this time the effect of demonstration or deterioration can not be demonstrated!
4. Do not put cell phones, mp3 and other electronic equipment close to the coil, or the coil will produce high-frequency magnetic field interference, making mobile phones, mp3, and other equipment failure or damage!
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight deviation for the measurement data.
3. Please allow 1cm-2cm error due to the hand measurement .
Package includes:
1 x DIY Tesla Coil Module Kit
| NO. | Component Name | PCB marker | Parameter | QTY. |
| 1 | Metal film resistor | R1, R4 | 10K | 2 |
| 2 | Metal film resistor | R3, R5 | 2K | 2 |
| 3 | TIP41 | Q2 | / | 1 |
| 4 | LED | LED1, LED2 | 3mm | 2 |
| 5 | Audio socket | J2 | / | 1 |
| 6 | Electrolytic capacitor | 1uf | C1 | 1 |
| 7 | IRF530 | Q1 | / | 1 |
| 8 | Power socket | J1 | 5.0*2.1mm | 1 |
| 9 | Primary coil | L1 | 2-3T | 1 |
| 10 | Secondary coil | L2 | 350T | 1 |
| 11 | Copper pillar | / | M3*10 | 4 |
| 12 | Screw | / | M3*6 | 4 |
| 13 | Heat sink | / | / | 1 |
| 14 | PCB | / | 40*76mm | 1 |
More Details
customers reviews ( 10 )
4
/ 5.0
5 stars
90%
4 stars
10%
3 stars
0%
2 stars
0%
1 stars
0%
By ozsvathk
Great fun! I'm a beginner, but I had no trouble assembling it. Coolers must be installed before soldering. The roll should be glued to the base. The fiber protruding from the roll can also be glued to a piece of cut cardboard. I replaced one of the LEDs with a different color and the wire I sent with a better one. I haven't tried the sound yet, but it sure works.
Jó móka! Kezdő vagyok, de nem okozott nehézséget az összeszerelése. A hűtőket forrasztás előtt fel kell szerelni (én elrontottam, ezért látszik a képeken a gyurmaragasztás). A tekercset az alapra kell ragasztani. A tekercsből kilógó szál is rögzíthető ragasztással egy kivágott karton darabra. Én lecseréltem az egyik LED-et más színűre, és a küldött vezetéket egy jobb minőségűre. A hangot még nem próbáltam, de biztos működik az is.
2021-12-29 00:00:00
By BG733912435
livraison un peu longue mais tout les composants sont là. Pas d'alimentation fourni mais pour le prix c'est normal. Instructions en chinois mais schéma électrique très clair.
2021-07-13 00:00:00
By BG933174810
Nice little machine. A disadvantage for me as non-Chinese customer are the all Chinese instructions.
To compensate for that, I wrote my own assembly instructions (in English). I tried to upload them but there is an error message about exceptions. If you want the .pdf to publish on the Banggood site, tell me.
2021-02-27 00:00:00
By BG143654131
جميلة جدآ . ملاحظة يرجى الانتباه الي اتجاه الملف الثاني وابعاده عن ملف الاول L1 . لان الدارة لن تعمل بشكل قوي وصحيح في حال كان اتجاه الملف L2 غير صحيح .
2021-01-11 00:00:00
By Tom
Works as stated. The blue spark is very tiny but the luminescent bulb lights up spectacularly. You can present it like a nice trick to the kids. I have added a thermo-silicone paste between the transistors and their heat sinks. And finally I put a small fan from an old video-card - no worry to burn out the transistors even at 25 V.
2020-11-14 00:00:00
By VladoKW
Product as description. Assembled diy kit and tested ok. Used only half of wire provided in the kit to make pimary coil, only 2 turns around the HV coil. Supply voltage around 18V to get a visible spark. Good product. Recommend.
2020-04-07 00:00:00
By alfaone
Very nice item, take care that the primary winding L1 (i used 2 turns) is in the opposite direction of the secundary coil L2! experimenting with the numbers of turns of L1 and the voltage 12-24V gives different results…I have made 2 little video's, but cannot add them :(
2020-02-14 00:00:00
By huseyinyildiz
be carefull with polarity of some elements. And leave shorty first coil if you want spark . I have to be abla get spark at 12v and 19v .
2020-01-05 00:00:00
By DBTech
It only took me about 30 minutes to put together. Make sure you pay attention to the polarity of the capacitors and LEDs when you install them. Also, there are 2 different types of MOSFETs in the kit and the PCB will be labeled with where each one goes.
The pictures in the BangGood listing are pretty misleading as there is no electricity shooting out of it once it’s built as shown in the picture. I tried it from 3 volts all the way to 24 volts and, while things do change at different voltages, there’s still no electrical light show like they make you believe.
I also wanted to get this to help me practice soldering and, since this only has a few pieces in it, it is a pretty good kit to start with.
I made a full video about it here: https://www.youtube.com/watch?v=_eMg0dcVrHg
2019-11-28 00:00:00
By gijs
works very well, i love it !
2018-11-26 00:00:00
