FNIRSI DSO-TC2 Handheld Digital Oscilloscope LCR Meter Graphic Display Transistor Tester 2.4-inch TFT Color Screen LED Backlight for Auto Repair Appliance Repair

SKUJ31592

0 Reviews

USD 69.99

Wholesale Prices :

Qty:	4-7	>=8
Price:	$39.59	$37.39

Qty:

In stock

30-day Return Policy, Learn More

Description

weight: 485 g

>>Please click here to download the English manual<<

Description:

FNIRSI-TC2 ingeniously integrates digital oscilloscope, electronic component tester, PWM signal generator and other functions into one.Equipped with large-size color dot matrix TFT display.Built-in rechargeable lithium battery.Bring more practical functions to users with a small size,Also has good portability.

FNIRSI-TC2 has various working modes such as oscilloscope and component tester.Each time you click the power button, it will enter the mode selection interface.Press the "Up" and "Down" keys of the direction keys to select,Select "Mos Test" item, press"OK"key to enter component tester mode;Select the "Oscilloscope" item, press"OK"key to enter the oscilloscope mode

"Mos Test" mode can test various types of transistors, and can identify device type, pin polarity, hFE, turn-on voltage, junction capacitance; can test capacitance, resistance, inductance components, etc.

FNIRSI-TC2 is especially suitable for fast pairing of transistors, identification of mixed surface mount and wordless components, and preliminary screening of small batch components.

"Oscilloscope" mode to test the signal waveform of the circuit.Support online operation with computer, you can refresh the official firmware by yourself and complete the upgrade.

It is hoped that FNIRSI-TC2 can make the study and work of the majority of users more efficient and interesting.

Technical Parameter:

FNIRSI DSO-TC2 Equipment Parameters:

Display: 2.4 inch TFT color screen, LED backlight

Charging: USB Type-C, +5V

Size: 79 x 31 x 103mm (L x W x H)

Bracket: Hidden Support fram

Specifications Of Oscilloscope Mode:

The oscilloscope has a real-time sampling rate of 2.5MS/s and a 200kHz bandwidth

With complete trigger function (Single, Normal, Automatic), it can be used freely for both periodic analog signals and aperiodic digital signals

Up to ±400V voltage signal can be measured

Equipped with efficient one-key AUTO, the measured waveform can be displayed without cumbersome adjustment

Self-contained 80kHz /5.0V PWM wave test signal source with adjustable duty cycle

Real-time sample rate	2.5MS/S
Analog bandwidth	0〜200kHz
Input resistance	1MΩ
Coupling	AC/DC
Test voltage range	1:1 probe: 80Vpp (±40V)
Test voltage range	10:1 probe: 800Vpp (±400V)
Vertical sensitivity	10mV/Div 〜10V/Div (in 1-2-5 increments)
Vertical displacement	Adjustable, with indication
Horizontal time base range	10us/Div 〜500s/Div (in 1-2-5 increments)
Trigger mode	Automatic, Regular and Single
Trigger type	Rising edge, falling edge
Trigger level	Adjustable, with indication
Waveform freeze	Yes (HOLD function)
Automatic measurement	Maximum, minimum, average, rms, peak-to-peak, frequency, period, duty cycle
PWM output	FRQ: 0〜80KHz, Duty cycle: 0~100%, Amplitude: 5.0V

Technical Parameters Of Transistor:

This instrument can automatically identify and measure various transistors.Including NPN and PNP transistors, N-channel and P-channel field effect transistors, junction field effect transistors, diodes, double diodes, thyristors, etc.,and passive components such as resistors, inductors, capacitors, etc.

Automatic detection of pin definitions

It can automatically parse the infrared code of the NEC protocol

Other functional modes: including circuit continuity test, 0~16V input voltage measurement, PWM output, 0~24V Zener diode measurement, DS18B20 temperature sensor measurement, DHT11 temperature and humidity sensor measurement, etc.

Category	Scope	Technical Parameter
Triode	*	Magnification hfe, base-emitter voltage Ube, Ic/le, collector-emitter reverse cut-off current Iceo, Ices, protection diode forward voltage drop Uf ①
Diode	Forward voltage drop<5V	Forward Voltage Drop, Junction Capacitance,Reverse Leakage Current②
Zener diode	0.01 〜4.5V	(1-2-3 test area) forward voltage drop, reverse breakdown voltage
Zener diode	0.01 〜24V	(K-A-A test area) reverse breakdown voltage
FET③	J FET	Gate capacitance Cg, drain current Id at Vgs, protection diode forward voltage drop Uf ④
	IGBT	Drain current Id at Vgs, protection diode forward voltage drop Uf④
	MOSFET	Turn-on voltage Vt, gate capacitance Cg, drain-source resistance, protection diode forward voltage drop Uf④

SCRS	Turn-on voltage <5V, gate trigger current <6mA	Gate voltage
Triac	Turn-on voltage <5V, gate trigger current <6mA	Gate voltage
Capacitance	25pF 〜100mF	Capacitance value, loss factor Vloss ⑤
Resistance	0.01Ω〜50Ω	resistance
Inductance	10uH 〜1000uH	Inductance value, DC resistance⑥
Battery	0.1 〜4.5V	Voltage value, positive and negative polarity
Input voltage	0~16V	Voltage value
DS18B20	*	Temperature
DHT1	*	Humidity
PWM output	1.5kHz 〜9.99MHz	*
Infrared remote control decoding	NEC protocol infrared code	Display user code and data code, and display the corresponding infrared waveform

Note ①: Ices, Iceo, Uf are displayed only when valid

Note ②: Junction capacitance and reverse leakage current are displayed only when valid

Note ③: The turn-on or turn-off voltage of the FET must be less than 5V

Note ④: Displayed only when there is a protection diode

Note ⑤: Vloss is only displayed when valid

Note ⑥: Two-pin component and inductance measurement when the resistance is less than 2.1kΩ

Package included:

Standard version:

1 x DSO-TC2 tester

1 x Type-C cable

1 x Test book

1 x Regular probe

Upgrade version:

1 x DSO-TC2 tester

1 x Type-C cable

1 x Test book

1 x Regular probe

1 x Adapter

1 x P6100 high power probe

FNIRSI DSO-TC2 Handheld Digital Oscilloscope LCR Meter Graphic Display Transistor Tester 2.4-inch TFT Color Screen LED Backlight for Auto Repair Appliance Repair