FlySky FS-i6 2.4G 6CH AFHDS RC Radio Transmitter With FS-iA6B Receiver for RC FPV Drone Engineering Vehicle Boat Robot

The receiver and the sender are ready to work; they are paired from the manufacturer. I verified it with Micro Servo 9g SG 90 G connected to any of the 6 channels . Just power both the receiver and the sender and move the joysticks. The led of the receiver lights repeatedly if the devices are not connected and stay lighting continuously if the devices are connected. The servos will react accordingly. Apparently there are a feedback connection between the sender and receiver. If both devices are connected on the display of the sender appear the icon Rx battery. If the devices are not connected this icon disappeared, it remains only Tx icon, (see the photos). Inside the building the connection is stable more than 10m. Not yet verified in open space. Arrived from Czech Republic to Romania in 5 days.

Same with this radio remote control I received at the same time as the drone does not belong to the drone but I posted the command at the same time and I received them suddenly... In the package is the remote control and a technical book . I mention that I did not receive with it and the Connection cable with the simulator... But I'm pleased it arrived on time

Supr product. It is value for money but only the problem is customs fee.

For a beginner like myself this one seemed like a good choice in terms of both price and features (I don't think I will use the i-Bus, but it doesn't hurt either). In reality, the quality actually turned out to be better than I expected: the plastics and the knobs don't feel "cheap" at all, and even the internal PCB and wiring look quite fine to me. The menus are very intuitive for a novice. Got the unit yesterday, tested with the FS-iA6B receiver plus some servos (don't have a model to do a real flight test yet...), and with the simulator cable which plugs into the PC mike jack; also tried a firmware update with USB serial cable (NOTE: these cables did NOT come bundled with the radio - I ordered them separately!) All photos made by me of course.

Good transmitter, I use it with my Eachine Racer 250. The dual antennas on the receiver are nice for better reception. One thing I found was that the default yaw position didn't seem to be centered (The stick was centered but the output wasn't, which I could see in the Display mode). I opened up the back and moved the wires a bit, which fixed it. Has been working normally after I did that. Also took me a while to work out that holding down Cancel is the confirm action for saving a setting.

I just did an unboxing and teardown for those interested: http://nathan.vertile.com/blog/2016/07/09/flysky-i6-radio-setup-and-hacking-guide/

Ошибся при заказе и выбрал себе модель со стиком газа справа, жутко неудобно для правши. Думал, что все пропало, однако, нашел в интернете инструкцию по разборке такого пульта и переставил местами стики. Программное обеспечение позволяет настраивать реверс и каналы передачи тумблеров. Все очень удобно и понятно. К коптеру подошел замечательно, даже телеметрия есть.

Second Purchase Of FS-i6 Was As Perfect As The First! Read first review under toots for details. The only thing I forgot to mention is the fact that with the IA6B receivers you get telemetry on the FS-i6 transmitter! You also get the ability to use old AFHDS receivers because transmitter is backwards compatible and can be can be used with either receiver. Range improved significantly with new IA6B receiver. Also with a little careful cutting work with a dremel tool, you can convert to a 6.6v LiFePo4 Receiver Pack futaba style battery to increase your time between charges and the need for throw away battery's. You could also use this setup sold right here on Bangood and not have to do any cutting at all!. http://www.banggood.com/Powerlion-AA-3_2v-Lithium-BLiFePO4-attery-Pack-With-Charger-p-921288.html Like I said in previous review, THANK YOU! FlySky and Bangood for making RC affordable for me again!

Works well, decent quality and the menu is easy to use. User manual needs to be written with more detail on how to use the different functions such as I bus and how the telemetry port works. Would be nice if they had RSSI. Only problem I had was one of the joystick cable harnesses was interfering with the joystick movement. Had to open the case and secure the harness. All in all a good value for the price. An 8 channel unit would be nice. The 10 channel one is a little to pricey. One annoying feature is the beep noise warning the transmitter makes when there is no activity after a few seconds and there isn't a way to turn that function off.

OUTSTANDING VALUE!!! Does what the big boys do for about 1/32 of the price! I have used FlySky radios since getting back into RC 4 years ago. I do catch allot of teasing from the guys at the field about how CHEEP I am, but these FlySky's are the REAL DEAL! I now have 10 different versions and have yet to have ANY! problems with my FlySky's. They have all been converted to either LiPo or LiFe batterys. I have 10 radio's with a plane storage capability of over 100 planes for about the cost of ONE of the big guys (futaba, spectrum) THANK YOU! FlySky and Bangood for making RC affordable for me again!