ESP32-CAM-MB-WiFi MICRO USB ESP32 Serial to WiFi ESP32 CAM Development Board CH340G 5V Bluetooth+OV2640 Camera+2.4G Antenna IPX

• weight: 485 g

>>>Manual: Click here to open<<<

Note:

This product has built-in antenna,if you need to use external antenna, you should resoldering resistance with soldering iron by yourself.

Step 1: To weld this two parts in blue box

Step 2: To Fuse the two position selected by the green boxes in the picture

Step 3: to weld a Resistor

The results are as follows

2.4G WIFI Antenna:

SMA connector 2.4GHz 2dBi Wireless WLAN Antenna Aerial

Gain: 2dbi

Connector:RP SMA Male (female pin) Connector

Color: black

Antenna length :11cm

ESP32-CAM-MB Introduction:

The HK-ESP32-CAM-MB module is a small camera module with a size of 39.8*27. This module can work independently as the smallest system. A new WiFi+Bluetooth dual-mode development board based on ESP32 design, using PCB on-board antenna, with 2 high-performance 32-bit LX6CPU, using 7-level pipeline architecture, main frequency adjustment range 80MHz to 240Mhz. Ultra-low power consumption, deep sleep current is as low as 6mA. It is an ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module.

HK-ESP32-CAM-MB adopts Micro USB interface, convenient and reliable connection method, convenient to apply to various IoT hardware terminal occasions.

Parameter:

Use low-power dual-core 32-bit CPU, which can be used as an application processor.

The main frequency is up to 240MHz, and the computing power is up to 600 DMIPS

Built-in 520 KB SRAM, external 2MB PSRAM

Support UART/SPI/I2C/PWM/ADC/DAC and other interfaces

Support OV2640 and OV7670 cameras, built-in flash

Support picture WiFI upload

Support TF card

Support multiple sleep modes.

Embedded Lwip and FreeRTOS

Support STA/AP/STA+AP working mode

Support Smart Config/AirKiss one-click network configuration

Support secondary development

Application scenario:

Home smart device image transmission

Wireless monitoring

Smart agriculture

QR wireless recognition

Wireless positioning system signal

And other IoT applications

Specifications:

Working voltage 4.75-5.25V

SPIFlash default 32Mbit

RAM internal 520KB + external 8MB PSRAM

Wi-Fi 802.11b/g/n/e/i

Bluetooth Bluetooth 4.2BR/EDR and BLE standard

Support interface (2Mbps) UART, SPI, I2C, PWM

Support TF card, maximum support 4G

IO port 9

Serial port rate default 115200bps

Spectrum range 2400 ~2483.5MHz

Antenna form Onboard PCB antenna, gain 2dBi

Image output format: JPEG (only OV2640 support), BMP, GRAYSCALE

Packaging method DIP-16

Transmit power 802.11b: 17±2dBm (@11Mbps)

802.11g: 14±2dBm (@54Mbps)

802.11n: 13±2dBm (@MCS7)

Receiving sensitivity CCK, 1Mbps: -90dBm

CCK, 11Mbps: -85dBm

6Mbps(1/2BPSK): -88dBm

54Mbps (3/464-QAM): -70dBm

MCS7 (65Mbps, 72.2Mbps): -67dBm

Power consumption Turn off the flash:180mA@5V

Turn on the flash and adjust the brightness to the maximum:310mA@5V

Deep-sleep: The lowest power consumption can reach6mA@5V

Moderm-sleep: the lowest can reach20mA@5V

Light-sleep: the lowest can reach6.7mA@5V

Security WPA/WPA2/WPA2-Enterprise/WPS

Working temperature -20 ℃~ 70 ℃

Storage environment -40 ℃~ 125 ℃, <90%RH

Weight 10g

Package includes:

(optional)

Type1:

1 x ESP32-CAM-MB WIFI

1 x ESP32-CAM Development Board

Type2:

1 x ESP32-CAM-MB WIFI

1 x ESP32-CAM Development Board

1 x 2.4G Antenna IPX