Eachine E160 V2 6CH Dual Brushless 3D6G System Flybarless RC Helicopter BNF/RTF Compatible with FUTABA S-FHSS

SKUK08190

10 Reviews

USD 155.99

Wholesale Prices :

Qty:	4-7	>=8
Price:	$126.89	$119.84

Qty:

In stock

30-day Return Policy, Learn More

Description

weight: 485 g

Description:

Brand: Eachine

Item: E160

Product: RC Helicopter

Product size (CM): rotor diameter 305mm body length 305mm height 98mm

Flying weight: 156g (with battery)

Flight time: about 5 minutes

Charging time: 30-60 minutes

Remote control mode: 2.4G remote control

Remote control distance (m): 120 meters

Number of driving motors: main motor (brushless) 1312 tail motor (brushless) 1103

Battery details: 7.4V 600mAh 25C

Features:

Communication protocol compatible with FUTABA S-FHSS, expandable satellites receiver, support DSMX DSM2 PPM S-BUS format

1> Adopt all-metal CNC rotor head without aileron design, using aerodynamic principles to design blades to provide strong power and airframe self-stability

2> The new rotor clip linkage structure, the transmission efficiency is more accurate, with small clearance and flexible rotation, which is more conducive to the accuracy of flying feel.

3> Use 1308 external rotation brushless motor for more powerful power, 1104 tail brushless motor tail lock, 7.4v 600mah 25c large rate battery

4> 4.3g metal tooth high precision digital steering gear. Response speed 90 ° / 0.06ms

5> Set 3D6G system, one-button switch of remote control

6> The 3D mode uses a 3-axis gyroscope, which is responsive and can easily make a pan, roll, fly, hurricane, pendulum, etc

7> 6G mode uses 6-axis gyroscope, flight stability, especially suitable for beginners to fly

8> Standard 6-channel remote control

9> Equipped with special balancing charger

Note: The propeller screws need to be tightened before flying

If the tail swings sideways during hovering or slow flight, please clean the bearings or replace them with new ones.

Helicopter Munual: click here

Transmitter Munual:click here

RTF Package:

1* Eachine E160 RC Helicopter

1* Transmitter

1* USB Charging Wire

2* Main Blade

1*Main Gear

1* Manual

1*7.4V 600mAh Lipo Battery(1,3 or 4 pcs, optional)

1* Screwdriver

1* Wrench

BNF Package:

1* Eachine E160 RC Helicopter

1* USB Charging Wire

2* Main Blade

1*Main Gear

1* Manual

1*7.4V 600mAh Lipo Battery(1,3 or 4 pcs, optional)

1* Screwdriver

1* Wrench

Eachine E160 V2 6CH Dual Brushless 3D6G System Flybarless RC Helicopter BNF/RTF Compatible with FUTABA S-FHSS

More Details

customers reviews ( 10 )

5 / 5.0

5 stars 100%

4 stars 0%

3 stars 0%

2 stars 0%

1 stars 0%

View All Reviews (10)

By niczo

Hibátlan állapotban kaptam meg a csomagot. A heli nagyon igényes kidolgozású, jó minőségűnek tűnik. A hozzá való távirányító még nem érkezett meg, úgyhogy a próba későbbre marad. Egy ajánlott minősítést megelőlegezek neki.

2022-04-09 00:00:00

By vulcan2000

great Heli for the money. easy to work on. parts are cheap and available. performance is Awesome. I have two! V1 and V2....But Major issue! both versions Randomly switch/GET STUCK in 3G non stabilisation (Acro mode) there's no known Fix! you have to Land and switch Everything off to regain 6G stabilisation!!! On next power up.... If you're a beginner Or only fly in 6G its Crash Time!!! naughty BANGGOOD also Sold me the V2 BNF but when it arrived it was the V1. you can tell the difference by looking at the blade grip bearings, V1 has a copper washers and a slightly larger gap on head. all canopies Removed pictures the (V2 is the bottom one with green blades) and the V1 has blue blades.

2021-10-31 00:00:00

By BG483693269

Así me ha llegado el helicóptero,imposible volarlo. Ha tardado en llegar más de un mes y después de tanta espera llega con problemas de fabrica. Encima reclamo una sustitución del producto y no paran de pedirme fotos y más fotos porque según ellos,eso no afecta al vuelo del helicóptero. INCREÍBLE.

2021-04-27 00:00:00

By luisu

Product arrived very fast,box resisted shipping and goods arrived well protected, binding to RM transmitter was easy. Seems more robust than other brand micro helis. Have to wait for better weather to test and fly.

2021-01-22 00:00:00

By utay310

very good! Please note that the throttle curve is different from xk products.

2020-08-07 00:00:00

By Jontxu999

box a bit crushed, but the plastic inner holds well. the heli is a xk k130 updated with. brushless tail, metal gear servos... very Happy with this heli.

2020-07-21 00:00:00

By Paul

A quick initial review of the E160 for Spectrum/JR users and a few thoughts based on my initial experience - and I am in no way a 3D pilot. The E160 is designed for Futaba S-FHSS users to bind and fly but Spectrum/JR users fear not and read on! I bound a Redcon DSMX satellite receiver to my DX8e radio using a full size DSMX receiver as a host. Plug the pre-bound satellite receiver into the DSM port on the flybarless control board on the helicopter fuselage. I attached the receiver to the top of the elevator servo using a 3M foam pad.You MUST set up the pitch and throttle curves on your TX BEFORE powering up the helicopter. This is because the servos are set to maximum throws (plus) and you will put severe strain on them if you don’t do this. My trial and error settings I used are included below, but it you use those in the manual initially you wont got too far wrong and then tune these to suite your own ability/flying style as I did.Before you fly you need to check the rear elevator servo arm and ensure that it is not binding on the right hand servo body (when viewed from above). Mine was (poor quality control/design by Eachine) and I had to carefully remove the servo from the mount and re-profile the servo arm elbow to give adequate clearance from the right hand servo main body. Here are my Spectrum radio settings: Swasplate Type : NORMAL 1 Servo. Servo Setup : Travel - all 100%, Sub Trim - all 0, Normal/Reverse - All Normal D/R and Expo - 100% and 0% (set other curves to suit as required). Throttle Curve: N: 0,85,85,85,85%. 1: 85,85,85,85,85%. 2: 90,90,90,90,90%. H 0%. Pitch Curve: 1: 35,43,50,58,65%. 2. Same as 1 (for gentle aerobatics with a 85% throttle curve). 3: 32,40,50,60,68% (for 3D with 90% throttle). Hold : Same as 1. GYRO: +21.0%, -10%, -10% (The +ve setting should make the helicopter more stable (6G mode), the -ve setting should remove the 6G mode for aerobatic flight. Timer: 4 minutes. Overall a nice little helicopter.

2020-07-12 00:00:00

By FyreSG

Impressive build quality - I love beautifully made CNC rotor head. The CF tail boom feels strong, should be able to handle crashes well. Paired with a FrSKY D8 receiver, and a matching cable, the E160 works perfectly with my Taranis X9D+ OpenTX FrSKY transmitter. I was not ready for 3D so I did a couple of sport flights. At a flat throttle curve of 70%, it flew around the field with ease. However, I encountered tail twitches during high speed turns, and tail loses hold during pitch pumps. Overall, it is a nice little helicopter, but could be more attractively priced.

2020-07-01 00:00:00

By jloubser7

Well recieved in RSA a big improvment on the K130...bigger battery...better landing skids...bigger blades...and brushless tail motor...flying 3D just became more fun and more affordable...thanx banggood

2020-06-26 00:00:00

By Nille

Die Verbesserungen gegenüber dem K130 scheinen gelungen. Die Servos sind spielfrei. Die Blatthalter bewegen sich leicht. Das Heck hält. Position und Höhe sind leicht zu halten. Das ging mit dem K130 ohne umfangreiche Nacharbeiten nicht. Das ESC regelt um Welten besser als das des K130. Es gibt auch die Verzögerungen beim Umschalten der Flugzustände (Gaswerte) nicht. Einige Teile scheinen kompatibel z.B. TS Gut für den K130. Die Bohrungen für die Schaftbolzen in den Blatthaltern sind zu groß geraten und die Schaftbolzen recht kurz. Da empfiehlt sich auf jeden Fall Loctide.

2020-06-20 00:00:00

Eachine E160 V2 6CH Dual Brushless 3D6G System Flybarless RC Helicopter BNF/RTF Compatible with FUTABA S-FHSS

Company Information

Customer Service

Connect with us

FOLLOW US AND GET NEWEST INFORMATION