DIY LED Digital Watch Electronic Clock Kit With Transparent Cover

muito bom! fácil montagem. só tive dificuldade na montagem da caixa de acrílico.

Simple and complete! Fun with the kids!

Bien armado. Falla reloj

Desde pequeño siempre me fascinó la electrónica. Actualmente soy ingeniero. Me siento muy feliz de llevar conmigo este reloj que yo mismo armé y que representa la tecnología de los Chips. ¡SALUDOS!

This is my second DIY soldering kit from Banggood and it was fun to assemble and looks great. Not a watch you'd wear to a formal event unless the theme was Steampunk though. I love it!! It took about 45 minutes to assemble and the hardest part was inserting the switches. I used very thin 0.4 mm solder for everything but soldering in the battery buckle. 0.4 mm was a bit thin. Next time I'll go 0.6mm or 0.8 mm. VERY IMPORTANT: The case has several very fragile pieces so, as per the great English instructions, be VERY careful when you peel off the protective film. I cracked one. Thank goodness for Crazy Glue. Also, attaching the strap took a bit of planning so be patient. It's obvious once you get it but you'll need to have the case partially assembled to insert the strap so plan ahead. Highly recommended.

Собирали с сыном 5 лет. Он сам паял, собирал. Доволен как слон и процессом сборки и готовым результатом. Отличный конструктор. Рекомендую. Жаль только это не совсем полноценные часы. Нет будильника. Нет даты. Время установить можно только при первом включении. То есть надо разобрать корпус и передернуть батарейку, чтобы перевести время. Время отображается при нажатии на левую кнопку на 5 секунд, затем индикаторы гаснут

This is DIY kit. The components is not too much and the PCB is very nice and easy to solder. The components allocation is pack but it is simple to solder, even for beginners. The acrylic case is very nice and well engineered. Got job for the case. It is a little bit tricky when mounting the screw over the up and bottom case. We must make the watch flat and if the screw is not align with the nut just make the watch flat and shake or knock the watch slowly with a screwdriver. It will fit nicely !. About the performace, it is nice in the dark, but it is a little bit difficult to see the time in clear place. The showing time is approx 2-3 secs, very fast. The battery will last for only one day (in my environment). Anyway, overall, nice DIY kit for electronics hobbyist.

Llego a México un poco después del tiempo estimado, pero las piezas llegaron en buen estado y fue muy divertido el ensamblaje pero las carcasas de acrílico son un poco frágiles y la duración de la batería es un un poco corta y si tienes problemas porque el reloj no avanza revisa que el oscilador de cristal no toque el integrado.

Пришёл набор через 28 дней в Астраханскую область Собрал плату по рекомендации покупателей этого товара я не поставил С14 и С15 плата сразу заработала Нижнюю деталь куда крепится ремень я сделал свою из нержавеющей стали 0,5 мм отполировал получилось красиво заменил ремешок на кожаный Рекомендую

Everything is included and well layed out. Requires basic tools and skills. It's a kit that's easily understood and will help improve a childs entry level skills. And when done a nice feeling of accomplishment. Turned out to be a nice weekend project. Definitely recommend. A little large for small wrist but that's no really the point.