Black 6-18M Outdoor Mist Coolant System Misting Cooling Kit for Greenhouse Garden Patio Watering Irrigation System

• weight: 485 g

Descriptions:
6-18M Outdoor Mist Coolant System Black Misting Cooling Kit for Greenhouse Garden Patio Watering Irrigation System

Specifications:
Material: Brass body with stainless steel orifice
Working Pressure: 2-30 Bar
Thread Size: 10-24UNC
Color: Black
Size:
Standard water tap adapter: Thread Size:3/4;
Mist hose:1/4(can work under normal pressure(2-3kg))

Type(Length)	Included
6M Misting System	- 3M water supply hose - 3M spray tube with 6pcs spray seats and 6pcs misting nozzles - 1pcs faucet connector - 1pcs stopper - 20pcs cable ties - 20pcs clamps
9M Misting System	- 3M water supply hose - 6M spray tube with 11pcs spray seats and 11pcs misting nozzles - 1pcs faucet connector - 1pcs stopper - 30pcs cable ties - 30pcs clamps
12M Misting System	- 3M water supply hose - 9M spray tube with 16pcs spray seats and 16pcs misting nozzles - 1pcs faucet connector - 1pcs stopper - 40pcs cable ties - 40pcs clamps
15M Misting System	- 3M water supply hose - 12M spray tube with 21pcs spray seats and 21pcs misting nozzles - 1pcs faucet connector - 1pcs stopper - 50pcs cable ties - 50pcs clamps
18M Misting System	- 3M water supply hose - 15M spray tube with 26pcs spray seats and 26pcs misting nozzles - 1pcs faucet connector - 1pcs stopper - 60pcs cable ties - 60pcs clamps

Instruction:
1. Connect the Facuet adapter to the water tap;
2. Turn on the water tap to wash the system for 1 minute to purge the system and remove any impurities;
3. Screw the misting nozzles to the Tee fittings, except the last one on the end plug;
4. Turn on the water tap to wash the system for 2 minute to insure that system is fully purged;
5. Turn the watet off and install the last nozzle into the fitting with the end plug;
6. Fix the misting line by the saddle clamps provided;
7. Turn on the tap slightly until jets are working, enjoy the cooling misting system;
8. Periodically remove the misting nozzles, and follow steps 2-5 to clean out the misting system.

Features:
- Widely used in factory humidification, cooling, disinfection, dust fall, landscaping, salt fog test, and other artificial fog;
- The nozzle use American precision punching device, The aperture is about 0.3mm, well-made, compare the using costs and gas humidification, able to save more than 10 times;
- The nozzle can be completely atomized by the pressure of the tap water, and the effect of using the high-pressure water pump is better;
- This series of nozzles does not require air assistance, the system is simple, spray a fine mist, sufficient atomization, has the advantages of energy saving, water saving, low cost and good effect; Stainless steel spray sheet is processed by advanced forging technology, strong durability, the working life is about 2.5 times compared with similar products.

Package Included:
1 Set x Misting System

More Details: