AODELAN BR-E1A Wireless Remote Control Shutter Release for Canon EOS R5 R 850D 6D Mark II 90D 77D 800D 200D II M200 Camera

• weight: 485 g

Feature:

Compatible with Canon:

EOS R, RP, R5, R6

M50, M6 II, M200

6D II, 77D, 90D, T8i (850D), T7i (800D), 200D, 200D II

PowerSho SX70 HS, G5 X Mark II, G7 X Mark III

Easy To Use:

It is small size,you can hidden it in your hand.And with Lanyard sling you can hang it around your neck or camera ,it is easy to carry and would not be easy to lose

This wireless remote control operating range up to 10m/32.8ft, you can shutter release in any direction,you dont have to aim the remote at the camera

Shooting Still Photos and videos, Focusing with for AF and Zooming

AODELAN Wireless Remote Control BR-E1A can be used to operate Canon digital camera wirelessly, including shooting still photos and videos, focusing with for AF and zooming*

For G5 X Mark II, G7 X Mark III and SX70 HS, BR-E1A can remotely control its zooming directly

For other compatible cameras, to support remote zooming, it is required the camera uses EF-S 18-135mm IS NANO USM lens and works with Power Zoom Adapter PZ-E1 (sold separately)

How to connect to your camera:

1.Turn on your camera - press setting - choosing Remote control - Enable

2.Choosing wireless communication setting - function - Remote - Pairing

3.Press the remote control W and T at the same time

4.In your camera you will see Paired with ,you need to press ok. It is finish to pair

How to setting your camera and remote:

Taking photo: For remote control: press the remote control to shutter release photo position. For camera: setting the camera to Non-recording mode - drive mode to remote control

Start/Stop video recording: For remote control: press the remote control to recording position. For camera: setting video mode - The drive mode is adjusted to the REMOTE CONTROL - The remote control should be enabled (the camera only sees this option when the remote control to the recording position)

For M50 Pairing Settings:

1.For your camera setting: go to setting under the wrench settings - choose wireless communication - choose function - choose remote

2.Once pairing is highlighted on the camera, for your remote control setting: you simply hold down the W and the T button on the remote for a few seconds and it should connect

3.Once the remote is paired with the camera, on the M50 you need to choose a camera setting - enter the MENU - in the CAMERA menu on the first tab - scroll down to "Drive Mode" - it to to "self-timer: 10sec/remote" - stress the "remote" part of that

4.On the remote when the switch on the side is all the way up, that is for taking still images. When the switch is all the way down, that is for starting and stopping video recording

Make sure your camera drive mode to remote mode

Specification:

Operating distance: Approx. 10m/32.8ft

Power: Lithium button cell battery CR2032

Dimension: 91.5 x 27 x 13mm (3.6 x 1.1 x 0.5 inch)

Weight: 13g (without battery)

Accessory: Strap x 1

Package Included:

1 x Camera Remote Shutter Release (Battery included. Other products are not included)

1 x Strap

1 x User Manual