ANENG CG02 Coating Thickness Gauge Meter 0.1micron/0-1500UM Car Paint Film Thickness Tester Measuring FE/NFE Manual Paint Tool

• weight: 485 g

ANENG CG02Digital Backlight LCD Thickness Meter Car Paint Thickness Tester Coating Thickness Gauge Meter



Introduction:

This coating thickness gauge integrates the functions of a magnetic thickness gauge and an eddy current thickness gauge, and can be used to measure the thickness of coatings on ferrous and non-ferrous metal substrates. The dual-function built-in probe is used to automatically identify iron-based or non-ferrous-based materials, and select the corresponding measurement method for accurate measurement.



Features:

1. This meter can measure the thickness of the surface coating of magnetic metal (iron-based) and non-magnetic metal (non-ferrous).

2. High measuring accuracy and wide measuring range: 0~1500um (0~59.0mil).

3. Dot matrix LCD liquid crystal display, you can see the data clearly even when the backlight is turned off during the day, and it saves electricity. In addition, the backlight can adjust the brightness.

4. With gravity sensing function, it can automatically rotate the content of the display to keep the direction consistent with gravity, making it easy to read the measurement data.

5. With 6 groups of data group storage function, it is convenient to count and compare the data and deviation of different parts.

6. It has a 4-point smooth calibration function, which makes the measured data more accurate.

7. With upper and lower limit setting and prompt function, the red and green two-color LED lights can flash, and the display screen prompts the state of over limit.

8. It is suitable for coating, metal processing, sales measurement, automobile paint inspection, second-hand automobile, accident vehicle assessment and other industries.



Specifications:

1. Type of iron base: magnetic metal iron base (FE)/non-magnetic metal non-ferrous base (NFE)/automatic identification.

2.Measurement method: single measurement/continuous measurement.

3.Mode: Single/continuous measure

4.Type: lron/Non-Iron

5.Range: 0~1500um(O~59mil )

6.Unit Switching: um micron/mil mil

7.Minimum Thickness: iron 0.5mm/aluminum 0.3mm

8.Automatic Shutdown: Shut down without operation within ten minutes

9.Battery Model:AAA*2

10.Min convex "R" of curvature: 5mm

11.Min concave "R" of curvature: 50mm

12.screen: LCD bright screen

13.Diameter of min measure area:20mm

14.weight Material: 95g/ABS Silicone

15.Measurement Accuracy: iron-based or aluminum-based/±(3%+2um)

16.Low battery reminder: lower than 2.4V



Package included:

1 x CG02 Thickness gauge( without batteries )

2 x Iron base piece

5 x Calibration piece

1 x Packing box(chose by option)

1 x Drawing rope storage bag

1 x Instruction manual

1 x Anti-drop lanyard