41g Happymodel Crux3 115mm CrazybeeX FR V2.2 F4 AIO ESC 25/200mW VTX 1-2S 3 Inch Toothpick FPV Racing Drone BNF w/ 1202.5 Motor Caddx ANT 1200TVL Camera Support Insta360 Go

SKUG34397

10 Reviews

USD 139.99

Wholesale Prices :

Qty:	4-7	>=8
Price:	$113.39	$107.09

Qty:

In stock

30-day Return Policy, Learn More

Description

weight: 485 g

Notice: Because the MPU6000 is out of production, the flight controller and related Drone will gradually be replaced by ICM20689 or BMI270.

Specification:

Brand Name: Happymodel

Model: Crux3

Item Name: 115mm F4 OSD 1-2S 3 Inch Toothpick FPV Racing Drone

Wheelbase: 115mm

Size: 97x97x35mm (without propellers)

Optional Receiver Version:

Internal SPI Frsky version (Compatible with ACCST D8/D16, Recommend D8 mode)

Internal SPI Flysky version(Compatible with AFHDS and AFHDS-2A Flysky transmitter)

Internal SPI DSM2/DSMX version(Compatible with Spektrum or Multiprotocol DSM2/X radio)

Weight: 41g (without battery)

Recommend Lipo Battery: 2s 350mah/400mah/450mah/520mah Battery ( NOT Included)

EX1202.5 6400KV Motor	Configu-ration:9N12P Stator Diamter:12mm Stator Length:2.5mm Shaft Diameter:Φ1.5mm Motor Dimension(Dia.Len):Φ1414.5mm Weight: 4.4g No.of Cells(Lipo):1-2S
Gemfan 3018 2-Blade Propeller	Center Thickness:5.5mm Prop Diameter:76.5mm Center Hole diameter:1.5mm
CrazybeeX FR V2.2 F4 Flight Controller	MCU: STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: MPU6000 or ICM20689 or BMI270 (SPI connection) Board Size: 28.5x28.5mm Power Supply: 1-2S battery input (DC 2.9V-8.7V) Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready Built-in Betaflight OSD(SPI Control) Built-in 5.8G VTX Built-in SPI Frsky/Flysky receiver or no receiver Built-in 5V 1A BEC (Frsky SPI RX Version) CRAZYBEEX FR V2.2 FC Firmware target: CrazybeeF4FR (Flysky SPI RX Version) CRAZYBEEX FS V2.2 FC Firmware target: CrazybeeF4FS (DSM2/X SPI RX Version)CRAZYBEEX DXS V1.0 FC firmware target: CrazybeeF4DXS (External Frsky RXSR Version) CRAZYBEEX PNP V2.2 Firmware target: CrazybeeF4DX (External TBS CRSF NANO Version) CRAZYBEEX PNP V2.2 Firmware target: CrazybeeF4DX
Onboard 5A BL_S 4in1 ESC	MCU upgraded to EFM8BB21 Power supply: 1S LiPo/LiPo HV Current: 5A continuous peak 6A (3 seconds) Support BLHeliSuite programmable Factory firmware: S_H_50_REV16_7.HEX Default protocol: DSHOT600
Onboard Frsky SPI D8 Receiver Version	SPI BUS receiver Frsky D8 compatible Compatible Non EU transmitter D8 model Channels: 8ch Failsafe support No ground interference ( Transmitter and receiver 1 m from the ground): 200m~300m
Onboard Flysky SPI receiver Version	Protocol: AFHDS and AFHDS-2A Switchable Channels: 8ch(AFHDS) or 14ch(AFHDS-2A) No ground interference ( Transmitter and receiver 1 m from the ground): 200~300m Failsafe support
Onboard DSM2/X SPI receiver Version	SPI BUS receiver DSM2/DSMX compatible Channels: Max 12ch Failsafe support No ground interference ( Transmitter and receiver 1 m from the ground): 200m~300m RSSI enable (show on the goggles)
Onboard 5.8G 40CH 25/200mW VTX	Output power: 25mw~200mw switchable Frequency: 40CH Input voltage: 3.3V 5.5V Current consumption: 300mA(type) Frequency: 5.8GHz 5bands 40 channels With Race band Smartaudio ready
Caddx ANT 1200TVL Camera	Image Sensor: 1/3" CMOS Sensor Horizontal Resolution: 1200 TVL TV System: NTSC or PAL Switchable IMAGE: 4:3 Synchronization: Internal Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000 S/N Ratio : >52dB (AGC OFF) Video Output: CVBS Lens: 1.8mm Min. Illumination: 0.001Lux@F1.2 Auto Gain Control: YES BLC: YES WDR: Global WDR DNR: 3D DNR Dimensions: 1414mm(with bracket to 1919mm) Wide Power Input: DC 3.7-18V Work Temperature: -20℃~+60℃ Weight: 2g (N.W.)

Features:

- 41gram 1-2s brushless Toothpick drone

- New AIO 4in1 CrazybeeX flight controller

- CADDX ANT 1200tvl Camera

- New 1202.5 brushless motor

- XT30 connector

- Compatible with Insta360 Go Camera ( this camera is NOT Included, you can add it by yourself.)

Pacakge Included:

1x Crux3 Frame and Canopy

1x Optional Receiver

1x F4 Flight Controller AIO 5A ESC Board

1x 5.8G 25-200mW VTX ( built-in Flight controller)

4x Happymodel EX1202.5 6400 KV Motor

4x Gemfan 3018 Propeller CW

4x Gemfan 3018 Propeller CCW

1x Caddx Ant 1200TVL Global WDR with OSD 2g Ultra Light Nano FPV Camera

1x Screw Driver

1x Propeller Disassemble Tool

1x Happymodel Handbag

41g Happymodel Crux3 115mm CrazybeeX FR V2.2 F4 AIO ESC 25/200mW VTX 1-2S 3 Inch Toothpick FPV Racing Drone BNF w/ 1202.5 Motor Caddx ANT 1200TVL Camera Support Insta360 Go

More Details

customers reviews ( 10 )

5 / 5.0

5 stars 100%

4 stars 0%

3 stars 0%

2 stars 0%

1 stars 0%

View All Reviews (10)

By Skat79

Crux3 dotarł cały i zdrowy! Gorąco polecem mega dobry sprzęt

2021-12-10 00:00:00

By Beeeg

Great little quadcopter to learn to fly on and then kick on with into full on freestyle once you get the skills. I am practicing using a 1s 18650 li-ion battery (samsung 25R), very docile in this configuration which is exactly what is required for a beginner. My OSD was not working properly with the factory settings, it would not appear properly and went missing completely when armed, Long story short I had to flash betaflight 4.2 to fix the problem, so far none of the dreaded RSSI issues with the update although I am flying close range only. The thread locker on the motor bolts was incredibly tight, I stripped one of the Allen heads trying to undo them in order to fit some prop guards, this was not a major issue to repair though and the kit has enough spares as well. Very happy with the purchase in general.

2021-11-19 00:00:00

By RAGEROCKnight

Mi sono innamorato di questo drone. Bello da vedere, bello da pilotare. Arrivato da magazzino cz in 3 giorni, mai visto una consegna così rapida. Con batteria 2s 350mAh ci volo quasi 10 minuti. Ho scelto la versione dsmx che offre un range bestiale come ricevente integrata Spi. Arriva già aggiornato con l'ultimo firmware betaflight, dovete solo bindare alla radio e volare. Con Tbs questo drone diventa un mid range senza rivali. Darei 6 stelle davvero!!!

2021-05-12 00:00:00

By RYO

This is a review of my second purchase. I chose the FrSky external receiver version. The main board seemed to be'CrazybeeX PNP 2.2', Strictly because it was a different version. You can check 'VOUT' on the official homepage of the manufacturer, but It wasn't inside the Crux3 that I got. I needed an external VTX because the internal VTX is so poor. So when I contacted Happymodel about this, I got an answer. And with an image! A very kind maker!

2021-03-01 00:00:00

By BG151165535

Amazing little drone! Took all of five mins to setup and I was off and running. Took it out today for its maiden flight outside in crazy windy conditions and it handles like a champ even in freezing windy conditions. Great little cheap outdoor quad.

2021-02-17 00:00:00

By BG332185611

Bardzo szybka wysyłka, otrzymałem paczkę po 12 dniach od zamówienia. Dron na razie testowany wewnątrz, fajnie na początku można polatać i potestować na 1s, na 2a ma dużo więcej mocy. Nie mogę się doczekać latania na zewnątrz. Polecam! (wersja Frsky r-xsr)

2021-01-31 00:00:00

By Basti

only 40g and you can use a 300mah 2S Lipo for good flying. now with a cap on the XT30 connector to protect the esc's

2020-12-16 00:00:00

By Basti

very light and good toothpick quad with 25-200mW good VTX, good motors. good speed with 2S Lipo

2020-11-25 00:00:00

By w1lly

I've got one thanks to Nick's rewiew but mine is with R-XSR. It's amazing, it's quite and powerful in the same time. And the range... oh my God the range is extraordinary. I recommend this quad as well. I love it

2020-11-10 00:00:00

By Benjie

Another winner from Happy Model..

2020-11-02 00:00:00

41g Happymodel Crux3 115mm CrazybeeX FR V2.2 F4 AIO ESC 25/200mW VTX 1-2S 3 Inch Toothpick FPV Racing Drone BNF w/ 1202.5 Motor Caddx ANT 1200TVL Camera Support Insta360 Go

Company Information

Customer Service

Connect with us

FOLLOW US AND GET NEWEST INFORMATION