25.5x25.5mm GEPRC GEP F722-45A F7 Flight Controller AIO 45A BL_S 2-6S 4in1 Brushless ESC for Cinelog35 HD Whoop RC Drone FPV Racing

• weight: 485 g

Changelog:
June 5th,2022: this flight controller has started to use a new MOS tube, the appearance has changed, but the performance is the same as before.
June 14th,2022: Gyro updated to BMI270/42688
June 25th,2022:Mounting Hole Size changed from 26.5×26.5mm to 25.5×25.5mm.

Specification:
Model: GEP-F722-45A AIO
MCU: STM32F722
IMU: BMI270/42688 gyro/accelerometer(SPI)
Firmware target:GEPRC_F722_AIO
OSD:Betaflight OSD w/ AT7456Ev
UART Ports: R1 T1 / R2 T2 / R3 T3 / R4 T4 / R5 T5
Beeper:YES
LED:YES
USB:Micro USB
BEC output:5V@1A
Intergrated LC Filter
ESC MCU:8BB21F16G
Continuous current:45A
MAX current:55A (10s)
Input:2~6S
Supports:Dshot600,Oneshot,Multishot
BlackBox: 16Mb
Traget:G_H_30
Size:32x32mm Board
Mounting Hole:25.5×25.5mm
Weight:8.8g

Features:
- MCU: STM32F722,with strong performance and higher computing speed.
- It has 5 full UART ports, which can connect more external devices
- Design 6p connector for DJI AIR UNIT MODULE, and just plug and play .
- The BLheili_S 45A ESC can handle 45A continuous current(55A burst), totally support the 2-6S lipo battery, which can bring the drone a stronger flight performance.
- Support OSD parameter adjustment, buzzer, led and other functions.
- 8g ultra light weight
- 5mm * 25.5mm mounting hole, suitable for most frames.

Package Included:

1 x GEP-F722-45A AIO
1 x XT30-7CM-18AWG Power cables
1 x 35V220UF capacitor
1 x SH1.0-6Pin to GH1.25-8Pin cables
8 x M2*6.5mm Damping rings