20x20mm MAMBA MK4 F722 MINI F7 MPU6000 Flight Controller with 3.3V 5V 9V BEC Output Support DJI O3 Air Unit for RC Drone FPV Racing

• weight: 485 g

Specification: ( Manual)

Brand: MAMBA

Model: MK4 F722 Mini

MCU: 216MHz STM32F722
GYRO:MPU6000
Target：MAMBA F722_2022A
OSD: Yes
Blacbox: 16M Flash Memory
Barometer: SPL06
Uarts: 6Set
I2C: Yes
F.Port: Yes
RSSI: No
Buzzer Pad: Yes
CURR Pad: Yes
ESC Signal: 8 Set
ESC Soft: Dshot300/600/1200
ESC Telemetry: Yes
Power Led: Yes
LED Controller:BF LED
AIR UNIT Port: Yes
WIFI: No
VTX Switch: Yes
Receiver Protection: Yes
TVS Protection: Yes
BEC: 3.3V 0.5A& 5V 2.5A& 9V 2A
Input: 3~6S Lipo (12.6~25.2V)
Mounting size: 20mm,M2/M3
Supply :
8pin sh1.0 ×1
AIR UNIT sh1.0 ×1

MAMBA MK4 (FOURTH GENERATION):

1 The pad area increase by 30% 2 Pad spacing increase by 100% 3 MP9943 synchronous rectifier BEC 4 MINI series upgrade D] interface and 5V 15W/9V 18W 2set BEC 5 The whole series uses Tpye-C 6 The whole series supports 6set uart and 12C 7 A full range of integrated Flash and Baro 8 4 set power protection 9 32Bit ESC all support 128K 10 Mini seres FC use 2mm and 3mm fixing holes, special damping ring 11 Upgrade the twisted pair anti-jamming cable, and the rein- forcement process

Package Included:

1x MAMBA MK4 F722 Mini Flight Controller

1x bag of Slicone Damping

1x 8pins Cable for Flight Controller

1x 6Pins Cable for Air Unit