19.5g Happymodel Moblite7 75mm 1S Diamond F4 AIO 5A BB2 ESC Reciver 25/200mW VTX Whoop FPV Racing Drone BNF w/ EX0802 19000KV Unibell Motor Runcam Nano 3 800TVL Camera

SKUG85034

10 Reviews

USD 115.99

Wholesale Prices :

Qty:	4-7	>=8
Price:	$98.09	$92.64

Qty:

In stock

30-day Return Policy, Learn More

Description

weight: 485 g

Notice: Because the MPU6000 is out of production, the flight controller and related Drone will gradually be replaced by ICM20689 or BMI270.

Notice:

Because the previous materials of the bag are seriously out of stock, happymodel change it in soft fabric material .

At present, our stock are mix, will send randomly.

July 18th, 2021.

Specification:

Brand: Happymodel

Item Name: Moblite7 1S 75mm ultra light brushless whoop
Wheelbase: 75mm
Size: 97x97x25mm
Weight: 19.5g (without battery)
Weight: 36g (with Original 1s 650mah Lipo battery )

Motor	Model: EX 0802 19000KV ( New Unibell Version) Configuration: 9N12P Stator Diameter: 8mm Stator Length: 2mm Shaft Diameter:Φ1mm Motor Dimension(Dia.Len): Φ10.5mm14.9mm Weight(g): 1.7g No.of Cells(Lipo): 1S only
Flight Controller	(Frsky SPI RX Version) DiamondF4 FR FC Firmware Target: CrazybeeF4FR MCU: STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: MPU6000 Or ICM20689 or BMI270. (SPI connection) Original whoop size compatible Power supply: 1S battery input (DC 2.9V-4.35V) Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready Built-in Betaflight OSD(SPI Control) Built-in 5.8G VTX Built-in SPI Frsky/Flysky receiver Built-in 5V 1A BEC
Onboard 4in1 ESC	MCU Upgraded to EFM8BB21 Power Supply: 1S LiPo/LiPo HV Current: 5A continuous, peak 6A (3 seconds) Support BLHeliSuite programmable Factory Firmware: O_H_50_REV16_8.HEX Default Protocol: DSHOT600
Onboard Frsky SPI D8 receiver Version	SPI BUS Receiver Frsky D8 Compatible Compatible Non EU transmitter D8 model Channels: 8CH Failsafe Support No ground interference ( Transmitter and receiver 1 m from the ground): 200m~300m
Onboard Flysky Receiver Version	SPI BUS Receiver Protocol: AFHDS and AFHDS-2A Switchable Channels: 8CH (AFHDS) or 14CH (AFHDS-2A) No ground interference ( Transmitter and receiver 1 m from the ground): 100~200m Failsafe Support
Onboard 5.8G 40CH 25-200mW VTX	Output Power: 25mw~200mw switchable Frequency: 40CH Input Voltage: 3.3V 5.5V Current Consumption: 300mA (type) Frequency: 5.8GHz 5bands 40 channels (include Race band) Smartaudio Ready
Runcam Nano 3 FPV Camera	Model: RunCam Nano 3 Image Sensor: 1/3" CMOS Horizontal Resolution: 800TVL Lens: 2.1mm(M8) FOV 160° Signal System: PAL/NTSC Non Switchable S/N Ratio: >50dB Electronic Shutter Speed: Auto Auto Gain Control (AGC): Auto Min. Illumination: 0.01Lux@1.2F D-WDR: Auto Day/Night: Color Power:DC 3-5.5V Current: 110mA@5V 120mA@3.3V Housing Material: ABS Net Weight: 1.2g Dimensions: L14mmW14mmH9mm
Lipo Battery	Capacity: 650mAh Voltage: 3.8V Continuous Discharge Rate: 30C Instantaneous Discharge Rate: 60C Size: 60mmx18mmx8mm Weight: 16g Connector: PH2.0 Quantity: 2 PCS

Features:
- The lightest 1s 75mm brushless whoop
- Powerful and efficiency
- The lightest 1s AIO 5IN1 F4 flight controller
- New Unibell EX0802 brushless motors
- Low profile Canopy design
- VTX power switchable 25mw~200mw

Package Included:

1 x Happymodel Moblite7 75mm Whoop RC FPV Racing Drone
Option1: 1 x DiamondF4 FR built-in SPI Frsky Receiver
Option2: 1 x DiamondF4 FS built-in SPI Flysky Receiver
4 x EX0802 KV19000 Unibell Brushless Motor
1 x HQPROP 40MMX2 Propeller(4cw+4ccw)
1 x Runcam Nano 3 FPV Camera
1 x Built-in 5.8G 40ch 25mw-200mw VTX
2 x 1S 650mah Lipo Battery
1 x Propeller Disassemble Tool
1 x Screwdriver
1 x Happymodel Carry Case

19.5g Happymodel Moblite7 75mm 1S Diamond F4 AIO 5A BB2 ESC Reciver 25/200mW VTX Whoop FPV Racing Drone BNF w/ EX0802 19000KV Unibell Motor Runcam Nano 3 800TVL Camera

More Details

customers reviews ( 10 )

4 / 5.0

5 stars 90%

4 stars 10%

3 stars 0%

2 stars 0%

1 stars 0%

View All Reviews (10)

By ALEX77NEW

Квадрокоптер Moblite7 понравился своей простотой, минимум деталей, хорошими моторами, лёгким весом. Но многое пришлось изменить, но это касается для полётов по комнате. Для улицы возможно будет всё хорошо. Крепление камеры переделал. Штатное крепление постоянно сбивается особенно если летать по комнате. Новое крепление напечатал пластиком TPU, оно фиксируется шурупом и годится только для собранного квадрокоптера https://www.thingiverse.com/thing:5422385 Для другой рамы, что запасная, там нужно моделировать другое крепление. Угол установки камеры для комнаты практически не нужен, там скорость не такая большая. Но для гонок можно и сделать наклон камеры. Настройки полётного контроллера тоже не очень годятся для полёта по комнате, потому что если задеть препятствие, то квадрокоптер сильно отскакивает, теряется управление, долго восстанавливается. Нашёл настройки на сайте https://oscarliang.com/flash-betaflight-moblite-6-7/, там, в комментариях, MATTI предлагает настройки для Mobline6, даёт ссылку на гугл диск. Я частично применил эти настройки для Moblint7 с ними оказалось очень легко летать по комнате, квадрокоптер уже так не отскакивает! Rate тоже немного подстроил под себя. Так же поставил более лёгкие аккумуляторы на 450 mAh. С аккумуляторами 650 mAh, которые идут в комплекте лучше годятся для улицы из-за своей массы и большей ёмкости.

2022-06-30 00:00:00

By BG105053815

EXACTLY 10 calendar days from China to St Catharines Ontario!!! Before I ever flew this unit I made some mods. I added a UZ80 canopy AND a small beeper (Nick Burns) I added a zip tie and heat shrink to the antena (Justin Davis) Great little flyer, fast indoors but lots of fun outside, canopy crawling in trees with this little thing is a blast.

2021-10-27 00:00:00

By Irfan Shariff

Delivered 3 days earlier than estimated, packaging was OK nothing special, no issues with the drone. I am a first time fpv pilot, so still struggling to fly properly, will post an update after few weeks.

2021-10-09 00:00:00

By Farkiii

great little drone, works well. a lot of pepole say that it breaks easily, but ive been flying it for a week, crashing into everything, and it did not break. so i would definetly recommend it! also the canopy it comes whith is crap, so i printed my own. i get about 9 min flight times. great product!

2021-09-11 00:00:00

By Harenson Henao

2 weeks to be on my hands, fast shipping, very well packaged. The drone flies really well, perfect for indoors and can also handle moderate wind. I crashed it several times and it flies just as good it flew when I connected the first battery to it. 450mah lasts for about 4 and half minutes, no acro movements. Inches 650mah battery lasts for about 5 and half minutes, again, no acro movements.

2021-09-10 00:00:00

By Ammar81

Best whoop I've flown, nippy and long flight times... modded with a uz80 frame for better durability and fight characteristics...19.5 grams on new frame

2021-08-29 00:00:00

By sdawjee

This model is rated as the "best" overall brushless whoop (flying time, performance, durability). I will mod by adding a canopy and ant lite (I prefer the ant lite). Excellent price (purchased on flash sale from Banggood).. Well packaged, arrived safely and promptly. Thank you, Banggood team!

2021-08-15 00:00:00

By GEZIELMC

Recebi em umas 3 semanas, sem taxar, bem embalado. Conforme anúncio. Fiz o bind com o modulo XJT no modo D8 sem problemas. Depois é só configurar o drone pelo betaflight e configurar o rádio para vc setar os modos de vôo: armado, horizon e angle. Já comecei a voar com ele dentro de casa, é muito bom. O único detalhe que percebi é que uma das borrachas dos amortecedores que prendem a placa ao frame, estava do lado errado, e a cabeça do parafuso estava encostando na placa, mas facilmente corrigi isso. Ah, e com um pouco de carga consegui voar uns 8 minutos com cada uma das baterias que veio nele. Recomendo para quem quer aprender FPV e treinar em ambientes fechados, estou muito satisfeito com o drone.

2021-07-16 00:00:00

By Pjurenergy

Very fast shipping! Unfortunately the case was a bit squashed during transport, but luckily moblite has not been damaged. Moblite7 flies very fast and very long. Battery charging is about 20min. However, The battery rack is located in the wrong place (too close to te cables), so constantly pushing the battery in and out of the rack will damage the cable insulation or even break it.

2021-04-10 00:00:00

By tornado66

wow 9min flytime indoor with the 650mah 1s lipo, the moblite7 is noch durable, but very light under 20g and good PID setting to fly indoor or outdoor.

2021-02-27 00:00:00

19.5g Happymodel Moblite7 75mm 1S Diamond F4 AIO 5A BB2 ESC Reciver 25/200mW VTX Whoop FPV Racing Drone BNF w/ EX0802 19000KV Unibell Motor Runcam Nano 3 800TVL Camera

Company Information

Customer Service

Connect with us

FOLLOW US AND GET NEWEST INFORMATION